Home >> Toys >> Childrens Toys

Power Wheels Jeep Wrangler 2004 Instructions

Power Wheels are "ride-on" plastic vehicles manufactured for children by Fisher Price. Power Wheels are modeled after actual models of cars and trucks. They are powered by a small battery that fits under the plastic hood of the vehicle. These batteries can be removed from the vehicle and charged by a plug-in wall charger by parents. Power Wheels have a push-in switch that powers the vehicle either forwards or backwards when the child pushes the accelerator. A steering wheel allows the child to steer the vehicle like an actual car. The Power Wheels 2004 Jeep Wrangler only requires partial assembly.

Things You'll Need

Phillips screwdriver

Instructions

- 1
  Plug one end of the battery charger into a wall AC outlet. Plug the other end into the battery. For the first use, allow the battery to charge for a full 12 hours. Charge for 4 to 5 hours for every use after that.
- 2
  Unplug the battery from the wall charger and insert the 25-amp plastic fuse into the fuse slot at the top of the battery.
- 3
  Slip the battery into the battery compartment inside the hood of the Power Wheel Jeep Wrangler and connect it to the plastic cable running from the underside of the chassis.
- 4
  Place the plastic toy engine cover over the battery compartment and then screw down the two fastening screws with a Phillips screwdriver.
- 5
  Snap the plastic hood cover into the two slots just beneath the windshield.
- 6
  Press the "forward" button down and allow your child to get in and drive the Wrangler.

Childrens Toys