Home >> Toys >> Construction Toys

Instructions for the Red Box Take Along Work Bench

Red Box Toy Factory Limited makes themed play-sets for young hands and minds. Included in these sets is the Take Along Work Bench, a small tool bench that folds up and into itself and, when set up, displays the bench's toy tools. This combination makes it fun for youngsters to set up the work bench and use the toy tools in the kit.

Instructions

- 1
  Open the Take Along Work Bench case and remove the tools and legs for the bench. Take out the blue tool panel from the center of the case and set aside.
- 2
  Place the four legs into the bottom of the black case top. Insert one of the long orange plastic screws into the case and leg holes, and tighten it with a plastic nut on the inside. Do this on each leg.
- 3
  Place the blue bottom of the case into the middle of the legs, under the black bench top (the black case top) and tighten it to the legs with a set of orange screws and nuts included in the kit.
- 4
  Screw the tool panel to the back of the black case, using the provided short orange screws and nuts.
- 5
  Let your child push the tool holders into the holes on the panel, and hang the tools where he wants.
- 6
  To break down the Take Along Work Bench, unscrew all the nuts and remove all the screws. Place the tools, nuts, screws and legs into the case, as well as the blue panel. Close the case and place it in storage until the next use.

Construction Toys