Hobbies And Interests
Things You'll Need
Instructions
Assemble your construction worker mini figure. Snap the torso onto the legs, then attach his head and construction hard-hat.
Construct the real-wheel axle area. Using the pieces provided, assemble the axle and its surrounding blocks. Build up from the flat, rectangular yellow base piece, attaching the grey axle piece and the grey and yellow secondary base pieces. Then, attach the grey rectangular piece with the hook extension. Use the remaining rectangular blocks to heighten this area.
Construct the front-wheel axle area. Using the pieces provided, assemble the axle and its surrounding blocks. Again build up from the flat, rectangular yellow base piece, this time attaching the grey axle piece and the square grey secondary base piece. Then, attach the grey rectangular piece, this time with the bar extension (to connect to the hook extension on the rear-wheel axle area). Use the remaining rectangular blocks, and the yellow triangular blocks, to heighten this area.
Attach the real-wheel axle section to the front-wheel axle section. Top both with the large flat grey base pieces. Then snap the ladder pieces to each side at the joint to complete the base of the tractor.
Build up the body of the tractor. Using the pieces provided, build up the bulk of the vehicle. Top the existing grey base pieces with a layer of smaller yellow flat pieces at the rear, and smaller grey flat pieces at the front. Then use the taller yellow blocks to build up the back end and surround the seating area. Attach the steering wheel and the axle for the front-loader.
Assemble the back end. To the large, square grey base piece, attach the smaller grey base pieces and place the long thin yellow base piece at one end. Top this yellow piece with the two curved yellow accessory pieces. Attach the grills and red-and-white striped warning stickers. Once assembled, snap this section in place at the rear of the base.
Construct the arm for the front-loader, building out from the axle at the front end of the base. Snap the large grey arm pieces to either side of the existing axle, and insert a second axle at the second set of cylindrical holes on the inside of each arm. Connect the two arms at the end with a third axle, topped by three layers of flat squares.
Construct the top of the tractor cab. Place the two windscreens together, then connect them by attaching a flat yellow "roof" piece to the top. Attach the work lights to the top. Attach the cab to the base, around and above the steering wheel.
Attach the final details. Snap on the warning light, the scoop of the front loader, and the wheels.