Directions to Build LEGO Cars

Select a 2-by-4 plate and a car frame from the LEGOs. Place a yellow 2-by-2 piece on each of the two raised 2-by-2 sections on the car frame.

Place a 1-by-4 plate centered across the second to last set of pegs on the 2-by-4 plate. On the two pegs in front of that place a 1-by-2 plate. Center a 1-by-2 plate on top of the 1-by-4 plate. Attach the two pegs behind the 1-by-4 section under the front of the car frame.

Place two round plates in the 1-by-2 that you centered on the 1-by-4 and place a steering wheel piece on the frame just behind the 2-by-2 piece closer to the front.

Add fender pieces onto the two 2-by-2 plates you placed on the frame.

Assemble your rear lights on corner plates using a 1-by-1 plate, a tap, a transparent tile and a reverse brick. Assemble the two rear lights opposite each other and place directly behind the two fenders under the frame. Place a 2-by-2 tile on top of them making sure it is secured.

Hide the engine with a 2-by-3 plate and attach an angular plate. Add a roof tile to the front on top of the angular plate to make the hood of the car.

Add a spoiler and a crash bar to the rear of the car, set the doors in place and add the grill to the center of the 2-by-3 that's just behind the hood.

Create your headlights with two 1-by-1 round plates and two reverse bricks and attach to the front fenders.

Add the windshield directly behind the grill.

Attach the wheels to the axles.