How to Fix a Saucy Walker Doll

Examine the entire doll to determine what needs repair. Remove the head, arms and legs if the walking mechanism is no longer functioning.

Remove the standard swivel-type head by gently pulling the head to one side and disconnecting the rubber tie that is fastened to a metal S-hook in the neck plug. Place the head and rubber tie aside.

Remove the legs, which are mounted to a metal axle, using two screwdrivers. Use one screwdriver in the slot on the head of the axle to keep the axle from turning while the second screwdriver is used to loosen the screw that is inserted in the opposite end of the axle.

Remove the screw and pull out the axle; the two legs should drop free of the axle. Replace the screw in the axle to prevent it from getting lost.

Remove the doll's arms by removing the rubber tie that connects them. The rubber tie is strung on an S-hook that is attached to the end of each arm. The tension of the rubber tie that connects the two arms holds them in place and allows the arms to move in the shoulder socket of the doll body. Place the arms and rubber tie aside.

Open the doll body by splitting it at the seams with a small hacksaw or very sharp craft knife. Cut along the manufacturer's original seams.

Replace the voice box if needed. Check the rubber ties, the neck plug that holds the S-hook for the head, and the S-hooks on the arms for any damage. Change these before reassembling the doll. These parts can be purchased from a doll repair supply company.

Reseal the doll body using a soldering gun. Reattach the legs to the metal axle.

Restring the arms and check that the tension is correct. The arms should not hang down loosely, nor be so tight that they are difficult to move.

Reattach the head making sure it has enough tension to sit in the neck socket straight, but not too tight, as the head should move from side to side when the doll walks.