Instructions for the Kool Toyz Build Your Own Robot Kit

Align the robot̵7;s feet to point outwards, at opposing 90-degree angles, to the sides of each leg. Slide the openings at the tops of the feet over the flange at the bottom of the robot legs and twist the feet with your fingers until the feet lock into place on the legs.

Tie a 2-foot-long length of string around the red terminals on the control wiring harness. Feed the string down into the opening at the top of the torso. Reach up inside the bottom opening of the torso with your fingers and pull the string until the red terminals come out the bottom of the torso. Untie the string and pass the red terminals through the holes on opposite sides of the bottom of the torso; one terminal though each hole.

Lay the robot on its back. Line the left and right legs up on the respective sides of the torso. Plug the red terminals on the wiring harness into the red terminals at the top of the leg sections. Place the socket at the top of the legs over the flanges on the lower end of the torso at a forward-facing 90-degree angle. Twist the legs counterclockwise, or downward, with your fingers until the legs ̶0;click̶1; into place.

Feed the blue plugs from the wiring harness through the holes on the sides of the upper torso with your fingers. Plug the blue terminals on the wiring harness into the blue terminals on the upper ends of the robot̵7;s arm. Attach the arms to the torso in the same manner as the legs.

Insert the single yellow terminal at the top of the wiring harness into the terminal on the bottom of the robot̵7;s head. Place the opening in the head over the flange at the top of the torso. Turn the retaining ring at the base of the head, clockwise, with your fingers until the ring is tight to the bottom of the flange.

Install the batteries, supplied with the kit, in the remote. Activate the robot by pressing the ̶0;On̶1; button on the remote; control the movements of the robot with the arrow keys on the remote.