Instructions for Fisher Price Ocean Crib Toy

Turn the Ocean Wonders crib toy over and use a Phillips-head screwdriver to remove the two screws at the top of the battery compartment cover. Remove the door and set it aside. Insert four C batteries, making sure to match the polarity as instructed. Replace the battery cover and tighten the screws with the screwdriver.

Position the toy inside the crib in an area that can be easily viewed. Grab one of the attachment straps and wrap it over the top rail of the crib. Insert the end of the strap behind the tabs on the back of the toy.

Pull the strap firmly and attach the nearest strap slot to the peg on the back. Make sure the toy is tightly fitted to the crib rails. If there is any slack, unhook the strap from the peg, pull the strap firmly and attach at the slot above for a tighter fit. Repeat with the other strap.

Pull the strings firmly around the crib rails. Tie the strings and make a knot.

Push the "Power/Volume" switch one click to the right to turn the toy on with a low volume. Push the switch one more click to the right for medium volume and one more click for high volume.

Push the "Mode" switch to the left to select the music setting. This setting plays up to 18 minutes of music or sounds.

Push the "Mode" switch to the right for the music, lights and motion setting. This setting plays music with additional soothing lights and motion.

Press the desired sound button on the back of the toy to select a sound or music. Choose between nature sounds, classical music or lullabies.

Push the "Power/Volume" switch to off when you are not using the toy.