Home >> Toys >> Infants Toys

Directions for Evenflo ExerSaucer

The Evenflo ExerSaucer activity center is a fun learning environment for your baby. Surrounded by interactive toys, your child will be encouraged to reach for, touch and explore the various objects. In addition to developing eye-hand coordination, your child also can bounce and jump in the unit and develop motor skills. Children age four months to approximately two years old can enjoy the ExerSaucer, thanks to the product's height adjustment feature. Careful assembly of the activity center will ensure that your baby's playtime is not only fun but safe.

Instructions

- 1
  Turn the seat ring upside down and find the six wheel holders. They are located inside the outer rim of the seat ring. Snap the white seat rollers onto the wheel holders.
- 2
  Flip the seat ring right side up. Place the seat pad onto the seat ring while aligning the triangle on the seat pad's label with the triangle on the seat ring. Snap the plastic pieces around the edge of the seat pad onto the seat ring pegs.
- 3
  Place the seat onto the tray and press down until you hear a snap. Spin the seat to ensure that it's properly installed.
- 4
  For assembly of the ExerSaucer Mega Active Learning Center or the ExerSaucer SmartSteps Active Learning Center: Attach the pedestals to the base by placing your finger inside the pedestal and attaching the spring to the hook on the base. Press the lower legs onto the pedestals until you hear a snap.
- 5
  For assembly of all other models: Snap the lower legs onto the base by aligning the tabs on the legs with the slots in the base and pressing down. Move the legs back and forth to ensure that they're locked into the base.
- 6
  Snap one spring dome over each leg opening on top of the tray. Turn each dome clockwise while pressing down until the pieces lock into place and the tabs on the domes line up with the tabs on the tray. If these guides do not line up, the domes could come off the tray and become a hazard.
- 7
  Turn the tray upside down and place a large spring in each spring dome. Place an upper leg over each spring and press down while fitting the tabs of the leg into the slots on the tray. Rotate clockwise until the height adjuster is facing outward.
- 8
  Turn the tray upright and place it over the base and lower legs. Align the upper and lower legs. Hold down the height adjuster and press the upper leg into the lower leg until you hear a snap. Repeat with the other two legs.
- 9
  Snap the included toys onto the tray as desired.

Infants Toys