Home >> Toys >> Other Toys

How to Put Together a Miggle Lighted Stadium

An electric football game relies on vibrations to move the football ̶0;players̶1; across the field. To enhance the game-play of the Miggle Electric Football Game & Lighted Stadium, put the base and stadium together prior to assembling the floodlights that will beam illumination onto the field. A few household supplies will be needed, but wiring skills are not necessary.

Things You'll Need

Newspaper
4 stadium lights
Rubber eraser

Instructions

Assemble Base
- 1
  Place the base of the Miggle Electric Football Game & Lighted Stadium onto a table. Rotate the stadium so that an end is facing you.
- 2
  Hold the circular bleacher section so that the connector tabs at each corner of the section are at the bottom. Line up the tabs with the slots on the top of each corner of the base.
- 3
  Push the tabs into the base until a clicking sound is heard. Wiggle the circular bleacher section to align its bottom with the top of the base.
Assemble Lights
- 4
  Rotate the stadium so that one of the four corners is now facing you.
- 5
  Lay a sheet of newspaper onto a table. Upend one of the four stadium lights over the newspaper. Rub an eraser against the two contacts on the bottom of the light for 10 seconds each.
- 6
  Turn the light right side up. Hold the light with the contacts facing downward and the fresnel lens on the front facing away from you.
- 7
  Insert the two contacts on the bottom of the stadium light into the two contact slots on the corner̵7;s top edge. Push the light into the slots until a click is heard.
- 8
  Rotate the stadium so that another corner is now facing you. Repeat Steps 1 to 4 with another stadium light. Repeat the rotation of the stadium and the installation of the stadium lights an additional two times.
- 9
  Plug the power cord attached to the base into an outlet. Prepare to play the game as the stadium lights on each corner illuminate the field below.

Other Toys