Home >> Toys >> Other Toys

How to Make a Tension Wrench With a Paperclip

Small padlocks can often be picked without a professional locksmith's assistance. This is especially important if you have locked valuables away in a locker or other secure location and have now misplaced the key. The only tool needed is a simple tension wrench to press against the tumblers in the lock. With just a large paperclip and a pair of needle-nose pliers, you can pick many padlocks. Be aware that picking the lock on any storage area that does not belong to you can bring criminal charges.

Things You'll Need

Large paper clip
Needle-nose pliers

Instructions

- 1
  Hold the paperclip in your hand vertically, with the end pointing up. Pull down on the available leg, moving it into a horizontal position.
- 2
  Grip the paperclip 1/8 inch from the end with needle-nose pliers. Bend this tip down until it is pointing toward the floor.
- 3
  Move the pliers back along the paper clip 1/4 inch, and push back on the clip. This will bend the paperclip 90 degrees to the rear.
- 4
  Hold the lock so that the smallest part of the key hole is facing up. Slip the tension wrench into the bottom of the key hole.
- 5
  Twist the paperclip, and press into the tumblers in the lock. The paperclip should turn the lock.

Other Toys