Hobbies And Interests
Home  >> Toys >> Other Toys

How to Get the Face Bolt out of L-Drago

Hasbro has put out a line of spinning toys called Beyblades. These toys can be used to battle other Beyblade opponents. You can take Beyblades apart to customize, switch out, repair or clean the parts. You will find the face bolt positioned on the top section of the Beyblade. The L-Drago Beyblade face bolt has a picture of a dragon in the middle of it.

Things You'll Need

  • Beyblade locking key
Show More

Instructions

    • 1

      Hold your L-Drago Beyblade in your nondominant hand. Use a firm grip for this.

    • 2

      Grab the locking key that is provided with your L-Drago with your dominant hand. The locking key looks like a ring with an attachment.

    • 3

      Position the locking key over the face bolt. Push down until the ring section locks into place over the face bolt.

    • 4

      Turn the locking key in a counterclockwise direction to loosen the face bolt. Keep turning until the face bolt comes off of the Beyblade completely.

    • 5

      Switch out the energy ring below the face bolt, if desired. You can also use the locking key to remove the performance tip if you want to replace it with a different one, are customizing your Beyblade or you are cleaning the individual parts.

    • 6

      Tighten the face bolt back into place with the locking key. Turn it in a clockwise direction until snug. Do not overtighten the face bolt.


https://www.htfbw.com © Hobbies And Interests