Home >> Toys >> Other Toys

How to Fit a Foot Pad to a Powerizer

The Georgia-based company, Poweriser, has taken the fun and excitement of stilts and pogo sticks and raised it to the next level with its brand of jumping stilts. The jumping stilts are spring-loaded stilts that strap to each leg by the use of a foot-pedal and a padded strap that wrap around the leg, just above the knee. Fitting a foot-pad on the Powerizer is part of basic assembly for the jumping stilts.

Things You'll Need

Allen wrench

Instructions

- 1
  Use an Allen wrench to loosen and remove the mounting screws on the font underside of the pedal, that mounts the pedal to the aluminum-ally frame of the jumping stilts. This hardware is situated on the bottom of the pedal, directly in the center of where the foot rests on the pad.
- 2
  Use the Allen wrench to remove the retaining screws that fasten the ankle of the foot pad to the frame.
- 3
  Remove the old pedal and slip the new one into place.
- 4
  Insert the ankle-mounting screws and tighten them with the Alllen wrench. Also, attach the front mounting screws, then tighten them firmly with the Allen wrench.

Other Toys