Hobbies And Interests
Things You'll Need
Instructions
Create the coat. Lay a white 2-by-4 plate on a flat surface on its lengthy side. It should look like a rectangle. Place one red 1-by-2 brick on both edges of the white plate.
Insert a red 1-by-2 brick in between the two red 1-by-2 bricks at the back edge of the white 2-by-4 plate. This is the back bottom portion of the coat. Place a red Technic brick 1-by-2, Ø4.9, brick in front of the red brick. This is the front bottom portion of Santa's coat.
Place a white 2-by-4 plate on top of the structure. Connect a red 1-by-2 brick on the right edge of the white plate. Then place another red 1-by-2 brick close to the other red brick on the back studs on the white plate. Both red pieces should lay against each other and form an "L" shape.
Insert a Technic Brick 1-by-2, Ø4.9, in the opening of the two red 1-by-2 bricks. There should be two studs still showing on the left side of the white 2-by-4 brick. Connect a red "Brick Corner 1-by-2-by-2" piece on the two studs. A small part of the brick should extend from the structure. Add a yellow 1-by-1 plate underneath the red "Brick Corner 1-by-2-by-2" piece. This is the body of the structure.
Create the arms. Place a red "Roof Tile 1-by-2/45°" piece on the two studs at the back of the structure of the red "Brick Corner 1-by-2-by-2" piece. Connect a red 1-by-2 brick next to the red "Roof Tile 1-by-2/45°" piece. Place a red "Roof Tile 1-by-2 Inv." next to the red 1-by-2 brick. All three pieces should sit at the back of the structure.
Connect two red "Roof Tile 1-by-2/45°" pieces in front of the back pieces, horizontally. The back of the pieces should face each other to add two studs.
Add the buttons on Santa's coat. Insert a white "Round Plate 1-by-1" piece in the two red "Technic Brick 1-by-2, Ø4.9" pieces in the front of the structure.
Create the beard. Connect the white 1-by-2 plate, horizontally, underneath the shorter edge of a white 2-by-4 plate. Place the white 2-by-4 plate, vertically, where the white 1-by-2 plate is facing the front of the structure. The white 1-by-2 piece should touch the structure and the back of the white 2-by-4 plate should extend by two studs away from the structure.
Finish the upper part of the structure. Place a white "Round Plate 1-by-1" piece on top of the stud of the red "Roof Tile 1-by-2/45°" piece that you added earlier to the left of the structure. The front of the structure should face you. Place a white "Round Plate 1-by-1" piece on top of the other white piece. Then, connect a red "Roof Tile 1-by-2 Inv." on top of the two white pieces.
Connect a red "Roof Tile 1-by-2/45°" piece on top of the red "Roof Tile 1-by-2 Inv." piece to the right of the structure that you added earlier. Add a yellow 1-by-1 plate on top of the red "Roof Tile 1-by-2/45°" piece.
Form the head structure. Add a white "Roof Tile 2-by-2/45°" piece on the two studs at the back of the white 2-by-4 plate that you added earlier for the beard. The white "Roof Tile 2-by-2/45°" piece should sit where the sloped part is facing the back of the structure.
Add a "Brick 1-by- 2 with a Santa Face Pattern" in the middle of the white 2-by-4 plate where the head sits two studs behind the white 2-by-4 plate and the added white 1-by-2 plate pieces that were added earlier for the beard.
Connect a white 2-by-2 plate on top of the Santa's head piece and the white "Roof Tile 2-by-2/45° that is behind Santa's head. Connect a black "Angular Brick 1-by-1" piece on top of the yellow 1-by-1 plate that is on top of the red "Roof Tile 1-by-2/45°" piece that was added in step 10. The circle part of the black piece should face you.
Add a red 1-by-2 brick, vertically, on top of the white 2-by-2 plate to the right that is on top of Santa's head. Connect two red "Roof Tile 1-by-2/45°" pieces next to each other on the last two studs on the white 2-by-2 plate where it, also, connects to the red "Roof Tile 1-by-2 Inv." to the left of the structure. This completes the head and body of Santa Claus.
Add legs and feet. Connect one black 1-by-2 plate on one of the studs of a black "Round Brick 1-by-1" piece. This is the foot and the leg. Repeat this step for the second leg and connect both pieces in the middle at the bottom of the structure.
Create the gift bag. Connect a gray 2-by-2 plate on top of a gray "Roof Tile 2-by-2/45° Inv." piece. Place a gray "Roof Tile 2-by-2/45°" on top of the gray 2-by-2 plate. Add a gray 2-by-2 plate on top of the gray "Roof Tile 2-by-2/45°" piece. With the Santa figure still facing you, connect the bag structure underneath the arm that is on the left of you and you're done.