Things You'll Need
Instructions
Assemble the top bar by inserting the small end of one top bar piece into the open end of the second piece and securing with a bolt and washer.
Attach the top leg pieces, the pieces that look like a bent Y, to the top bar with bolts.
Hook the end of each swing chain over a U-bolt.
Attach the four ends of chain to the top bar using the U-bolts.
Attach leg pieces to each of the openings in the top leg pieces with bolts.
Secure a support piece between each pair of legs using bolts.
Connect a support peg to the bottom of each leg so the pegs are extending down from the legs at an angle, pointing in the opposite direction as the leg it is attached to.
Drive the support pegs into the ground with a mallet.