Things You'll Need
Instructions
Place the oven part of the Creepy Crawler machine on a flat surface and plug it in. It needs at least 10 minutes to warm up.
Fill he cooling tray with water and set it aside.
Take the red sealer cap off the plastic goop. Insert the toothpick into the nozzle end of the goop to break the seal. Do this for every plastic goop color you want to use. Put the cap back on when you're done so the goop doesn't dry out.
Choose the mold you want to use and insert the handle into it, then set the mold on a flat surface.
Take your chosen colors and drip the goop into the center of each mold you want to create. The goop will dispense throughout the mold.
Lift the mold by the handle and place into the oven.
Take the mold out of the oven with the handle once the colors of the goop have changed colors. These colors will darken, except for black. Don’t overcook, as this won’t give your Creepy Crawlers the right consistency.
Place the mold into the cooling tray for at least a minute, or until it’s cool to the touch.
Use the prying tool to gently pull each Creepy Crawler from its mold.