Home >> Toys >> Other Toys

Creepy Crawlers Mixing Directions

Mattel toy makers created the Creepy Crawler for children to make their own imaginative toys. Children can make pencil holders, rings, necklaces and bugs using the Creepy Crawler unit. Four colors are provided with the kit, along with molds to provide hours of fun for children and parents. Advanced kits have molds for toy cars and dolls.

Things You'll Need

Toothpick
Screwdriver

Instructions

- 1
  Remove the red sealer cap from the goop bottle. Poke a hole into the spout using a toothpick and remove the toothpick. Do not remove the cork that is inside the goop bottle.
- 2
  Place the heating section of the unit over the light bulb and secure with screws. Screws are provided with the unit.
- 3
  Place the goop bottle inside the heating section with the label facing toward the outside of the unit. Cover the unit with the lid.
- 4
  Plug the unit into an electrical socket and heat for about 30 minutes.
- 5
  Remove the goop bottle carefully from the unit and pour into one of the molds provided with the unit. Combine colors inside the mold by adding dots of color and swirling the colors with a toothpick or other stirring object.
- 6
  Allow the liquid to cool for about 10 minutes and remove the figure from the mold. Use the pick provided with the unit to remove the cooled figure.
- 7
  Unplug the unit from the electrical socket.

Other Toys