Home >> Toys >> Pool Toys

How to Patch an Inflatable Water Slide

Inflatables are easily punctured. But don't despair if you find a hole in your inflatable water slide. With these instructions, you can patch any hole in your plastic inflatable water slide, and be out there enjoying the summer sun in no time.

Things You'll Need

Small piece of vinyl
Waterproof vinyl adhesive (Bostik shoe repair adhesive is a good choice)
Scissors
Spray bottle of soapy water
Air pump

Instructions

- 1
  Find the hole in the water slide by spraying the area around where you think the hole might be with soapy water. Inflate the slide and soapy bubbles should appear where the hole is.
- 2
  Dry the area thoroughly. Estimate the size of patch you will need.
- 3
  Cut the piece of vinyl to the correct size.
- 4
  Apply the adhesive to the area around the hole and to the edges of the vinyl patch.
- 5
  Join the patch and the slide together, applying pressure until the adhesive is dry. For best results, place something heavy (like a couple of heavy books) on the deflated patched area for about 24 hours to ensure the adhesive really holds with a watertight seal.

Pool Toys