Hot Wheels Car Wash Instructions

Prepare and Wash

• 1

  Remove the cap from the foam pump, located on the right of the base. Pour in a small amount of bubble solution and replace the cap.

• 2

  Remove the cap from the water pump on the left side of the base. Use the water cup and fill up the pump. Do not overfill either pumps.

• 3

  Place the Hot Wheels car at the lowest level ramp and lift the door. Push the car up the ramp and onto the platform. Slide the door closed.

• 4

  Press the foam pump up and down quickly, keeping your finger on the pump the whole time. Fully coat the car with foam. Lift your finger up and away from the pump.

• 5

  Rotate the elevator lever clockwise until the platform reaches the second level.

Rinse and Dry

• 6

  Press the water pump up and down quickly, keeping your finger on the pump the whole time. Clean the car off completely, then lift your finger up and away from the pump.

• 7

  Slide the lever, located at the base of the platform, back and forth to move the sponges. Alternate between the sponges and extra water to completely rinse the car.

• 8

  Rotate the elevator lever clockwise until the platform reaches the third level. Twist the knob, located on the top of the platform, back and forth to dry the car.

• 9

  Rotate the elevator until the car is directly in front of the turntable. Lift the platform up and push the car onto the turntable.

• 10

  Grab the tab and rotate the turntable clockwise until it is lined up with the ramp. The table will lift up and the car will begin rolling down the spiral ramp. Lift the toll gate at the bottom of the car wash to release the car.