Home >> Toys >> Toy Vehicles

How to Charge the Vectron Wave

Air Hogs manufacture popular radio-controlled (RC) aircraft using durable materials and simplistic controls intended for all skill sets.The Vectron Wave is a flying saucer with a single fan for propulsion. The transmitter doubles as a charger, since the aircraft has a built-in lithium ion battery for flight times of around 10 minutes. Learn how to charge your Vectron Wave to ensure proper functionality and great performance.

Instructions

- 1
  Open the battery wire compartment; it is located at the top of the transmitter's front face. It opens like a door; the bottom of the doorway has a latch. Pry open the latch with your fingers to release the door.
- 2
  Pull out the charger cable, then turn the transmitter to charge mode by sliding the power switch to charge (which appears as "CHG" on the transmitter).
- 3
  Plug the charger cable into the charge port on the Vectron Wave; it is located on the top-center of the aircraft. The transmitter's status LED should blink red, indicating it has entered charge mode.
- 4
  Wait 30 minutes for the Vectron Wave to fully charge. The transmitter's LED will illuminate orange when charging is completed.

Toy Vehicles