How to Make Decals for a Dub Diecast

Design your decals on your computer, using your choice of graphic design software such as Microsoft Paint or Corel Draw. Load a single sheet of decal paper in your printer's input tray and position the paper guides so they touch the decal paper but do not bow it.

Click the "File" option at the top of the window on your computer's screen, and then click "Print." Choose your printer from the drop-down menu and then click "OK" or "Print."

Retrieve the decal sheet from the printer after you allow it to sit in the tray and dry for at least two minutes. Place the decal sheet on a hard surface you do not care if you cut, like a cutting mat or old work bench.

Cut the decals out of the sheet using a pen knife, taking your time to trim up to the edge of each design. Clean the Dub diecast vehicle using a microfiber cloth, which will not leave behind lint or other debris.

Hold the different decals up to the vehicle, where you want to place them, making sure they will fit correctly. Once you have decided where to place the decals, peel off the decal paper's backing and press the decals onto the vehicle.