Home >> Toys >> Toy Vehicles

How to Charge a VRC Helicopter

The VRC helicopter is a small, battery powered remote control helicopter toy intended for kids ages ten and up. The VRC helicopter has a rechargeable battery pack that is charged using batteries inserted in the charger. The pilot can control the helicopter using a small joystick, or a tilt sensor built into the controller. When the helicopter starts flying slowly, or won't fly high enough, the battery in the helicopter needs recharging.

Things You'll Need

Phillips screwdriver
6 x "C" batteries

Instructions

- 1
  Turn the charger unit over and remove the two screws holding the cover on the battery compartment using a Philips screwdriver. Set the screws and cover aside.
- 2
  Install the batteries according to the illustration in the battery compartment.
- 3
  Replace the battery cover and reinstall the screws. Don't force the screws, or you may damage the charger. Turn the charger right side up.
- 4
  Make sure the power switch on the VRC helicopter is in the "OFF" position.
- 5
  Insert the power cable on the charger into the charging port on the bottom of the helicopter.
- 6
  Turn the power switch on the charger to the "ON" position. The red LED indicator will turn on, and the green LED indicator will start flashing green as the helicopter charges. The helicopter is ready to fly when the green charging light turns off.

Toy Vehicles