Hobbies And Interests
Home  >> Toys >> Toy Vehicles

The Instructions for Hot Wheels Fuel 'N Fire

Hot Wheels makes all kinds of toy car models. The company also produces play sets and toy tracks to use with its cars. The Hot Wheels Rumblers Fuel N' Fire Play Set emulates a gas pump that fuels cars and then sends them on their way down an angled track. It lights up and makes sounds as well.

Instructions

    • 1

      Assemble the track. Attach the long orange track to the end of the two-story blue piece below the gas pump. There are slots underneath each of the two ends of the long orange track. Both the tower and the blue ramp piece will have a thin plastic piece to slide into the slots on the orange track. Attach the remaining short blue piece to the end of the orange track; it acts as the end of the ramp.

    • 2

      Slide your Hot Wheels car under the blue two-story tower piece. The entrance is under the orange ramp.

    • 3

      Lift the back gray piece behind the gas pump. Where the hot wheels car is sitting is actually an elevator, and it raises when you move the back gray piece upward. The purpose of the elevator is to move your car to the top of the blue tower piece.

    • 4

      Push the plastic buttons above where the fuel pump sits, and pretend to pump gas into the car. When the car has enough "gas," push the car forward down the ramp. Then you can load your next car into the bottom of the play set and raise it up for fuel.


https://www.htfbw.com © Hobbies And Interests