Home >> Toys >> Toy Vehicles

How to Operate an Excalibur Wireless Indoor R/C Micro Flyer Helicopter

Excalibur's Wireless Indoor Micro Flyer helicopter is controlled with a remote. The instructions for operating the helicopter with the remote are fairly simple to follow, even easy enough for most children to understand. The plane should only be used inside and children should be supervised while operating the helicopter, to avoid accidents and potentially broken items. The remote for this small RC helicopter allows you to control the flight direction and the lift. It also has a trimming option that keeps the helicopter stable as you maneuver it through the air.

Things You'll Need

6 AAA batteries
Excalibur Wireless Indoor R/C Micro Flyer Helicopter
Infrared controller

Instructions

- 1
  Load six AAA batteries into the infrared controller. Select channel A, B or C for both the infrared controller and the helicopter.
- 2
  Flip the power switch for the helicopter "On".
- 3
  Clear a space on your floor, make sure there is ample room to operate the helicopter without breaking anything. Set the helicopter in the space you have cleared.
- 4
  Move the throttle stick forward gently until the helicopter comes up off of the ground. Push the throttle stick forward to make the helicopter go higher. Lower the helicopter by pushing the throttle stick down.
- 5
  Rotate the direction control stick left or right to fly your helicopter in that direction to rotate left and right. Use the trimmer control to keep the helicopter from spinning out of control. Press down on the trimmer opposite of the direction that the helicopter is spinning towards to counter the movement.

Toy Vehicles