Things You'll Need
Instructions
Place the shifter into the low speed "1" position. This is the left-most position in the Z-shaped shifter grate.
Loosen the lock-out screw to the right of the grate and remove the screw.
Insert the screw into its storage location. The screw is stored in a hole in the shifter handle. Storing it allows you to add it again if necessary.
Move the shifter into the "2" position at the far end of shifter travel--the end of the Z-shaped grate--and press down on the foot pedal. The Power Wheels can now travel at 5 MPH.