Instructions
Understand the principles of safe flying. Inform people nearby that you are flying a radio-controlled helicopter, and that they should keep an eye out for it. Be careful where you steer it, to avoid crashing it and possibly breaking or losing it, let alone injuring someone.
Conduct a pre-flight inspection, verifying that the rotors can tilt and spin freely.
Install batteries in the micro radio-controlled helicopter and in the radio controller. Switch on the power for both, and extend the radio controller antenna if it is extendible.
Stay within the transmitting distance between the controller and the helicopter, to ensure that you will be able to steer and land it.
Take off by moving the throttle control up in a smooth fashion.
Keep the micro RC helicopter close to the ground for your first flights until you get used to maneuvering it.
Adjust the trim tab left or right to eliminate a clockwise or counter-clockwise spin if the helicopter starts spinning while hovering.
Move forward or backward by pushing the control stick forward or backward. Practice turning left and right by moving the stick in either direction.
Climb by pushing the throttle control further.
Descend by pulling the throttle back, and decide on a good place to land.