How to Assemble Tech Deck Fingerboards

While it might sometimes be too inconvenient to go outside and practice your Ollies, kickflips and nosegrinds on your real-sized skateboard, it is never hard to practice these tricks and more while skateboarding with your Tech Deck. Tech Deck is a 96 mm skateboard made to be used with your middle and index fingers. These fingerboards have the same wheels, trucks, grip tape and graphics as the real-sized boards. Tech Decks come fully assembled, but you can change to graphic wheels. Customizing and maintaining your Tech Deck is just part of the fun.

Things You'll Need

• Tech Deck Tool
• Four Wheels

Show More

Instructions

1. • 1

     Turn your Tech Deck over so the the wheels and graphic are facing up.

   • 2

     Hold the tool in your fingers and put the ratchet side around the nut inside the wheel. Turn the tool counter-clockwise until the nut is removed.

   • 3

     Remove the wheel and replace with a new one. Make sure to have the wheel well facing outward.

   • 4

     Slip the nut onto the truck inside the wheel well and turn clockwise until you feel a slight resistance.

   • 5

     Repeat steps 2 to 4 for each wheel you want to change.