How to Fly a Honey Bee King 2

Calibrate the hover and pitch trim knobs on your remote control. The hover knob is located on the upper left of the controller, and the pitch trim is on the upper right. Both of these knobs should be turned to zero.

Check and adjust your trims to their center positions. You can find these three switches in the following places of your controller: one each below the joysticks, and one right in the middle of the controller itself.

Manipulate the left joystick up and down to control the height (known as pitch) of your Honey Bee King 2 helicopter. Pressing up will make the toy helicopter ascend, and pushing down on the joystick will make it descend.

Move the left joystick either to the right or left to control the yaw of Honey Bee King's flight. The yaw of the helicopter will only rotate in a 360 motion clockwise (pushing right on the stick) or counterclockwise (pushing left on the stick) and not necessarily strafe in the air from side to side.

Use the right joystick up and down to move the helicopter forward or backward. Pressing up designates the forward direction (known as fore), meaning the Honey Bee King 2 will move forward. Pushing down designates the back direction (known as aft), which will make it fly backward.

Push on the right joystick either to the left or right positions. Moving the right stick in either of these directions will slide the entire helicopter from side to side. Once you are comfortable with all the controls listed in the previous steps, you can now fly a Honey Bee King 2 toy helicopter.