Home >> Toys >> Toy Vehicles

How to Set Up RC Helicopters

Remote control toys have become a very popular gift during the winter holidays over the past several years--in particular, remote control helicopters. Some of these helicopters have removable propellers. These toys can be tempting to take out of the box and play with right away, but there is some preparation needed to ensure that you get the most out of them.

Instructions

- 1
  Plug the battery unit into the charger and charge the battery to its full capacity for the first use. On most remote control toys a light will turn on or flash when the battery has a full charge.
- 2
  Choose an area to fly the remote control helicopter that has very few obstacles. This will help you avoid collisions as you get used to the sensitivity of the controls.
- 3
  Check the area for any electronic devices that might interfere with the frequency of the remote control unit for your remote control helicopter. The frequency of the remote control unit should be indicated on the back of the remote control and in the directions for the remote control helicopter as well.
- 4
  Check the batteries in the remote control unit to make sure they are new for a first-time trial of your remote control helicopter.
- 5
  Attach any blades that come with your remote control helicopter. Depending on the model these may already be attached. Other models might need one or two propeller blades to be attached before flying.
- 6
  Turn on the power for both the remote control unit and the remote control helicopter. Both pieces will have their own power switches.
- 7
  Practice elevating the helicopter with the control that handles the lift of the remote control helicopter. After you have it elevated, practice with the thrust control to get a feel for how sensitive each of these controls are.

Toy Vehicles