Home >> Toys >> Tricycles

How to Adjust a PowerWing Handlebar Height

While not quite a bicycle, the Razor PowerWing shares at least some of a bicycle's features. Like a bicycle, the PowerWing relies on a handlebar for steering and control. The effectiveness of steering and control rely partly on individual comfort. Adjusting handlebar height, allows the rider to customize the PowerWing to find a more comfortable fit.

Things You'll Need

5 mm hexagonal wrench

Instructions

- 1
  Turn the black knob near the base of the handlebar assembly clockwise to loosen the handlebar folding mechanism. Pivot the knob forward.
- 2
  Fold the handlebar assembly to the side, exposing the stem bolt atop the PowerWing head tube.
- 3
  Turn the stem bolt counterclockwise until loose. The bolt requires a 5 mm hexagonal wrench.
- 4
  Raise or lower the stem connecting the handlebar assembly to the head tube. Adjust the height.
- 5
  Check that the black knob is in line with the front wheel. Use the 5 mm hexagonal wrench to tighten the stem bolt. Tighten the bolt enough to allow the handlebar and front wheel to pivot together. A loose bolt will cause the the handlebar and wheel to go out of alignment.
- 6
  Raise the handlebar assembly to its upright position.
- 7
  Pivot the black knob upright. Turn the knob clockwise to secure the adjustment.

Tricycles