Home >> Toys >> Tricycles

How to Install a Push Bar Adapter on the Kettler Go Green Tricycle

The Kettler Go Green FLDG Frog Trike provides advantages for both children and their parents. Children can spend hours riding around on a bright and fun tricycle with a bucket for their toys. Parents can feel comfortable with Kettler's sturdy construction and the patented "Fold 'n Ride" frame that makes it easy to carry. This tricycle provides an added bonus of being made of environmentally friendly materials. For younger children, parents can easily install an adjustable push bar, allowing the tricycle to become a fun and easy stroller.

Things You'll Need

Kettler Deluxe Stroller Pushbar kit
Adjustable wrench
Phillips screwdriver

Instructions

- 1
  Remove the tricycle seat. Install the push bar adapter piece by inserting the screw and tighten the nut using the adjustable wrench. Reattach the tricycle seat.
- 2
  Insert the spring clip into the push bar shell tube and push the shell tube into the push bar adapter. Keep pushing until you hear the spring clip click into place, locking the tube to the tricycle. Insert the screw in the provided hole through the shell tube and push adapter and tighten the nut.
- 3
  Insert the right and left stroller push bar connecting tubes into the grip tube and lock them in place with two screws and nuts.
- 4
  Find the two slide adjusters and loosen the knobs located on the back. Slide the two adjusters onto the push bar connecting tubes and tighten the knobs. Put the piece into the shell tube and insert the two screws and tighten the nuts.
- 5
  Screw the headrest into the lower slide adjuster using the Phillips screwdriver.
- 6
  Insert the spring clips into the two canopy arms. Connect the canopy arms to the top slide adjuster. Attach the canopy bar to the arms. Slide the cloth canopy over the bar and fasten using the provided hook-and-loop closer.
- 7
  Snap the drink/snack tray in place below the handle.

Tricycles