Things You'll Need
Instructions
Measure the body of the train and mark for cutting. Cut the rectangular section of wood for the base of the train. Cut a smaller block 1/3 of the size of the base. Cut the dowel into strips 2/3 the length of the train to look like logs or other train cargo.
Sand all edges of each piece for a smooth finish. Paint the pieces (including the wheels) in a visually appealing pattern. Simple is best for this application. Solid colors or stripes can be painted on side of the trains.
Glue the smaller block on top of the bigger block. Glue the doweling into place. Let it dry completely. Varnish the whole train and let dry.
Measure for wheel placement. For an average train you will want three sets of wheels per train car. Evenly space your marks and hold your wheels up to the train to double check your mark.
Drill three holes straight through the body of the train. Wiggle the rivets into the newly drilled holes and attach a wheel to each end. Test the wheels to make sure they have enough room to turn.
Measure for the eye screws in the front and back of the train car. Screw in the eyes and open one of them to form a hook so it can pull another train car easily.