How to Set Up a Sega Dreamcast System Using an RF Unit

Inspecting Your Television and VCR

• 1

  Check the back of your television and VCR for A/V inputs.

• 2

  Purchase an RF unit if your television and VCR do not have A/V inputs. The unit does not come with the Dreamcast.

Installing a Sega Dreamcast on a TV Set

• 3

  Disconnect the antenna from the television.

• 4

  Reconnect the antenna to the ANT IN terminal on the RF unit.

• 5

  Connect the TV OUT cable from the RF unit to the television.

• 6

  Connect the A/V IN cable from the RF unit to the A/V OUT terminal on the back of the Dreamcast console.

• 7

  Plug your television and Dreamcast console into a working outlet.

• 8

  Set the television to the correct channel.

• 9

  Plug the controller connector firmly into an open control port, with the flat side up on the front of the Dreamcast.

• 10

  Plug the keyboard connector firmly into an open control port on the front of the Dreamcast.

• 11

  Turn on the Dreamcast.

Installing a Sega Dreamcast on a VCR

• 12

  Disconnect the antenna from the VCR.

• 13

  Reconnect the antenna to the ANT IN terminal on the RF unit.

• 14

  Connect the TV OUT cable from the RF unit to the VCR.

• 15

  Connect the A/V IN cable from the RF unit to the A/V OUT terminal on the back of the Dreamcast console.

• 16

  Plug your television, VCR and Dreamcast console into a working outlet.

• 17

  Set the television and VCR to the correct channel.

• 18

  Plug the controller connector firmly into an open control port, with the flat side up on the front of the Dreamcast.

• 19

  Plug the keyboard connector firmly into an open control port on the front of the Dreamcast.

• 20

  Turn on the Dreamcast.