Home >> Internet Games >> Nintendo DS

How to Fix a Broken Pokewalker

The Pokewalker is meant to be clipped to a belt or left in a pocket, but its small size makes it easy to forget about on laundry day. If you accidentally washed your Pokewalker or got it wet in any other way, there is a good chance that it still works. The circuitry inside of a Pokewalker is mostly well-protected, but the device malfunctions when wet. If allowed to dry, the Pokewalker should function normally again.

Things You'll Need

Phillips screwdriver

Instructions

- 1
  Remove the screw from the back of the Pokewalker device using a Phillips screwdriver.
- 2
  Pull the back of the Pokewalker off and pop the battery out. Slide your fingernail under the battery and lightly pull up to lift the battery from its casing.
- 3
  Turn the Pokewalker over and let any excess water fall out of it. Place the Pokewalker, battery and backing in a warm, sunny spot. Leave the Pokewalker to dry for about 4 to 6 hours.
- 4
  Replace the battery in the Pokewalker and secure the backing using the screw you removed earlier. Turn the Pokewalker back on to check if it is still functional.

Nintendo DS