Home >> Internet Games >> Nintendo DS

How to Put the Clip On in Pokemon SoulSilver

"Pokemon SoulSilver" and "Pokemon HeartGold" both came with a device called a Pokewalker. This device essentially is a pedometer to which you can transfer your Pokemon to take them on walks. The motion sensors in the Pokewalker add up the steps you take and apply them to the Pokemon so that they get exercise, which helps them grow stronger. The Pokewalker came equipped with a flat back, but each copy of both games came with an additional backing with a belt clip so you don't have to carry the Pokewalker.

Things You'll Need

Phillips head screwdriver

Instructions

- 1
  Turn the Pokewalker device around in your hand so that the back of it is facing you.
- 2
  Remove the single screw holding the back in place using a Phillips head screwdriver. Pull the back of the Pokewalker off and set it aside.
- 3
  Place the Pokewalker backing with the belt clip on the Pokewalker. Line up the hole on the backing with the hole inside of the Pokewalker.
- 4
  Place the screw you removed earlier into the hole. Use the screwdriver to tighten the screw and secure the two halves of the Pokewalker device to each other.

Nintendo DS