Hobbies And Interests
Things You'll Need
Instructions
Set the Wii barcode-side up with the vent on the right. Use the flat-head screwdriver to remove two square stickers--the bottom center sticker and the top left sticker.
Set the Wii bottom-side up with the disc slot facing away from you. You should see four large Wii feet at the four corners of the bottom side. Use the flat-head screwdriver to remove two more stickers--the two stickers nearest the Wii's disc slot.
Use the flat-head screwdriver to remove the two feet farthest from the disc slot.
Use your fingers to remove the two removable panels on the left side of the console that houses the controller and memory card ports. This will reveal a black plate.
Use your Phillips screwdriver to remove the two screws on the right side of the black plate and the three screws on the left side of the black plate. Remove the black plate.
Unscrew the two bottom screws revealed after removing the black plate.
Set the Wii barcode-side up. Use the Phillips screwdriver to remove the two screws located where the stickers were.
Set the Wii bottom-side up. Use the Phillips screwdriver to remove the two screws located where the stickers were. Use the Phillips screwdriver to remove the two screws located where the bottom feet were.
Remove the front end of the Wii with your hands, unplugging the small wire attached to the front end while doing so. Grab the top and bottom sides of your Wii and pull them apart slightly. Use your flat-head screwdriver if you need assistance prying the two sides of the Wii apart.
Use the Phillips screwdriver to remove the four screws in your Wii's DVD drive. Take the drive out, removing the cables attached to the Wii case. You should now have access to all the parts of your Wii.