Hobbies And Interests
Instructions
Insert your fresh AA batteries into the Pelican Predator by opening the battery compartment on the underside of the controller. Close the battery compartment after the batteries have been inserted.
Select a channel using the channel slider on the face of the controller. Any channel is fine for one controller, but if you are using several controllers, it is important that they are each assigned their own channel.
Adjust the channel slider on the Predator̵7;s wireless receiver to ensure it is set to the same channel as your controller. For example, if your Predator is set to Channel 1, your receiver should be set to the same channel.
Insert the wireless receiver into Slot 1 of your PlayStation 2 console and use a paperclip to push the small button on the bottom of the receiver. This will tell the receiver to start looking for a controller.
Press the ̶0;Select̶1; button on your Predator controller to complete the sync process.
Load the game of your choice into your PlayStation 2 console and power on the system.
Turn on your Predator by sliding the On/Off switch located below the Channel slider on the face of the controller. You are now ready to play.