Things You'll Need
Instructions
Activate the system's "stand-by" mode by holding the "Reset" button down until the light turns red.
Unplug the PS2 Slim and detach any controllers and cables that might be attached to the system.
Open the door to the disc tray and locate the small circular lens in the bottom of the tray.
Dampen one tip of the cotton swab with the isopropyl alcohol and gently clean the surface of the laser lens.
Reverse the cotton swab and use the other side to dry any excess alcohol on the lens.
Repeat the process only if the lens is very dirty.
Close the disc tray door and reattach the power cord, controllers and cables to your system.