How to Hook Up Guitar Hero Wireless Drums for PS2

Assemble the Drums

• 1

  Slide the ̶0;H̶1; shaped frame piece into the two floor stands to assemble the drum rack.

• 2

  Set the drum pad controller onto the assembled drum rack and snap it into place. Sit in front of the drum controller and adjust the height to your needs.

• 3

  Attach the cymbals. Yellow goes on the left; orange goes on the right. Hook up the provided cables to each cymbal.

• 4

  Insert the two included AA batteries into the battery compartment on the back of the drum controller.

• 5

  Plug the kick pedal cable into the designated input on the back of the drum controller

Connect the Drums

• 6

  Plug the included wireless receiver into USB port on the front of your PlayStation 2.

• 7

  Turn on your PlayStation 2 and start the Guitar Hero game of your choice.

• 8

  Turn on the drum controller by pressing the ̶0;PS̶1; button in the center of the control pad.

• 9

  Press the connect button in the lower right-hand corner of the wireless receiver, then press the ̶0;PS̶1; button on the drum controller again to sync the drum controller with the PlayStation 2.