Home >> Internet Games >> PlayStation 3

How to Loosen the Trigger on a PS3 Controller

The "L2" and "R2" controllers on your PS3 controller are the triggers buttons. These buttons are located on either side of the top of the controller, just below the "L1" and "R1" buttons. If you think these buttons are too tight, you can loosen the trigger buttons. This isn't a procedure to take lightly as it involves disassembly of the controller. That being said, the procedure doesn't involve any risk of damage to the controller if done correctly.

Things You'll Need

Phillips-head screwdriver

Instructions

- 1
  Unplug your PS3 controller from the USB port at the front of the PS3 console.
- 2
  Turn the controller over and remove the five screws on the outside of the rear of the controller.
- 3
  Remove the back half of the controller. The main PCB (motherboard) board will be visible in the controller housing.
- 4
  Remove the single screw in the center of the PCB board and remove the board from the housing. You will now have access to the underside of the trigger buttons.
- 5
  Loosen the screws so that the triggers achieve the desired give.
- 6
  Reassemble the controller.

PlayStation 3