Home >> Internet Games >> PlayStation 3

How to Add Buttons to a PS3 Controller

Video game controllers have come a long way since the two-button days of the 1980s. For example, the modern PS3 controller has eight buttons and two analog joysticks. That ensures a lot of variety in the gameplay. However, it is possible for these buttons to become damaged over time. If this is the case with your PS3 controller, you can open it up and add new buttons to the unit.

Things You'll Need

Small Phillips screwdriver

Instructions

- 1
  Unplug your PS3 controller from the console and turn it over. Notice the five screws along the sides of the back of the controller.
- 2
  Remove the five screws using your screwdriver.
- 3
  Lift the back case of the controller off the front half.
- 4
  Lift the rectangular battery off the motherboard and set it to the side of the controller.
- 5
  Remove the single screw in the center of the motherboard that holds it in place.
- 6
  Remove the board and set it aside. You will now have access to the buttons in the front half of the controller.
- 7
  Remove any damaged buttons by lifting them out of their housing.
- 8
  Fit new buttons in the old one's places and replace the motherboard, screw, back housing and screws.

PlayStation 3