Home >> Internet Games >> PlayStation 3

How to Disassemble the PS3 Blu-Ray Drive With No Circuit Board

The PS3 console not only plays video games but also Blu-Ray DVDs as well. It does this via the large Blu-Ray drive inside of the console. If you are experiencing problems with the drive, such as discs that won't play when inserted, you can open up the unit and troubleshoot the problem. You can even do this while completely bypassing the motherboard of the console.

Things You'll Need

Phillips screwdriver

Instructions

- 1
  Unplug your PS3 from its power source as well as all peripheral cables from the front and rear of the unit.
- 2
  Remove the single screw on the left side of the top of the console with your Phillips screwdriver.
- 3
  Slide the top panel of the console slightly to the left and lift it up to remove it.
- 4
  Remove all screws on the metal top case of the unit. Remove the metal top case to expose the rectangular Blu-Ray drive.
- 5
  Remove all screws on the drive frame.
- 6
  Lift the drive out of the console and unplug the thick ribbon cable from its port at the back of the drive.
- 7
  Remove the screws on the sides and corners of the drive itself. Pull the two halves of the drive apart.
- 8
  Remove the screws around the internal laser assembly of the drive. Remove the laser assembly and set it aside.

PlayStation 3