How to Rewire the Elevator in Condemned 2

As you travel through the haunting world of "Condemned 2," you will be forced to investigate a number of grisly and horrifying locations. One such location is the doll factory, which is filled with exploding dolls, mysterious clues and quite a few bad guys. After defeating a particularly creepy villain wielding a saw, you will need to hotwire an elevator to progress further into the factory.

Instructions

1. • 1

     Connect the bare wire to the first connector on the elevator control panel.

   • 2

     Hook the thick wire to the second connector on the panel.

   • 3

     Hook the striped wire to the third and final connector.

   • 4

     Ride the elevator until it breaks. At that point, you will need to climb through the ceiling to track down the power fuse.