Things You'll Need
Instructions
Remove all of the cables from the PS3. Insert the flat-edged screwdriver into the seam between the PS3 and the hard drive compartment lid on the right side. Wiggle the hard drive compartment lid loose from the PS3. Remove the hard drive compartment lid.
Use the Phillips screwdriver to remove the small blue screw at the center bottom inside of the hard drive compartment. Pull the metal latch to the right to release the hard drive carrier that holds the hard drive. Pull the hard drive carrier out of the hard drive compartment.
Use the Phillips screwdriver to remove the screws from the sides of the hard drive carrier. Slide the 40 gigabyte hard drive out of the hard drive carrier and set it aside.
Slide the 60 gigabyte hard drive into the hard drive carrier so that it lines up in the same manner as the other drive did. Use the Phillips screwdriver to insert the screws into the sides of the hard drive carrier.
Insert the hard drive carrier into the hard drive compartment. Close the metal latch back to the right. Use the Phillips screwdriver to screw in the small blue screw. Put the hard drive compartment lid back onto the PS3.