How to Install Remote Joy Lite for PSP

Install Custom Firmware on the PSP

• 1

  Power off the PSP and insert the memory stick.

• 2

  Take off the battery cover and remove the original battery.

• 3

  Insert the Pandora battery. When you insert the battery, the PSP turns on automatically for a few seconds, then turns off.

• 4

  Hold down the left trigger while turning on the PSP and keep holding it until a menu appears.

• 5

  Select the custom firmware. The firmware number differs, depending on the version you are installing, but the number always has "M33" in it.

• 6

  Shut down the PSP after the custom firmware installs.

• 7

  Remove the Pandora battery and reinsert the original battery before turning on the PSP again.

• 8

  Select "Settings" from the main menu, followed by "System Settings" and "System Information."

• 9

  Check the firmware number to ensure that it matches the custom firmware number on the Pandora battery.

• 10

  Turn off the PSP.

• 11

  Hold down the right trigger and turn on the PSP at the same time. The M33 Recovery Menu displays.

• 12

  Select "Configuration" and "UMD Mode."

• 13

  Press "X" until you see the message "Currently: Sony NP9660 - NO UMD-."

• 14

  Close the menu and select "Exit." The PSP restarts.

• 15

  Select "Settings," "System Settings" and "Format Memory Stick" to complete the firmware installation.

Installing RemoteJoyLite

• 16

  Use your computer to download the PSP Type B USB driver from a PSP modding website.

• 17

  Connect the PSP memory stick to the computer using a USB cable.

• 18

  Install the PSP Type B USB driver on the memory stick.

• 19

  Download RemoteJoyLite.

• 20

  Install the plugin in the SEPLUGINS directory of the memory stick.

• 21

  Open the game.txt, pops.txt, vsh.txt and games150.txt files in the SEPLUGINS directory.

• 22

  Add the line "ms0:/seplugins/RemoteJoyLite.prx" to each of these files.

• 23

  Power off the PSP and hold the right trigger while turning it back on. This boots the recovery menu.

• 24

  Select "RemoteJoyLite" to enable it and turn off the PSP.

• 25

  Remove the memory stick from the computer and insert it in the PSP.

• 26

  Connect the PSP to the computer with the USB cable. The computer will detect RemoteJoyLite and start the setup process.

• 27

  Double-click RemoteJoyLite.exe to run the application.

• 28

  Press the "Esc" key to open the options menu if you want to configure the application.