Home >> Internet Games >> Sony PSP

How to Remove a PSP-1001 UMD Drive

Occasionally, device hardware can go wrong and need replacing. The Sony PSP handheld gaming system uses a UMD drive to play small discs with the game data. If the drive fails for any reason, you can remove it for replacement by disassembling the PSP. You will need small screwdrivers for the job and should perform it in a well-lit area to avoid losing any parts.

Things You'll Need

Small Phillips screwdriver
Small flat-head screwdriver

Instructions

- 1
  Remove the four screws on the back and bottom of the PSP.
- 2
  Lift off the PSP faceplate. Carefully pry up the home bar and screen.
- 3
  Unplug the cables connecting the screen to the unit and lift off the screen.
- 4
  Remove the screws securing the screen bracket. Two screws are on the back in the battery compartment, and five more are on the front securing the bracket to the unit. Lift off the bracket.
- 5
  Use a small flat-head screwdriver to unplug the ribbon cable from the UMD drive. Pry the holding clips down with the screwdriver and the ribbon cable will pop free. Remove the screw on the front of the unit at the base that keeps the UMD door in place.
- 6
  Pry off the UMD door from the base with a small flat-head screwdriver. Lift off the UMD door and place it to one side.
- 7
  Pry off the metal housing from the base with a small flat-head screwdriver. Lift up the housing and slide it to the right to remove it from the main assembly.
- 8
  Remove the four screws securing the drive. Lift out the UMD drive from the main assembly.

Sony PSP