Home >> Internet Games >> Video Game Accessories

How to Fix PS2 Controllers

The Playstation 2 is a console from Sony Computer Entertainment that allows players to play games on their TV. The main interface for this console is the PS2 controllers, officially referred to as DualShock 2 analog controllers, which receive commands through the pressing of buttons. Often, these buttons will become stuck or jam themselves behind the plastic casing of the controller. It is possible to fix these controllers by dismantling them and correcting the stuck buttons.

Things You'll Need

Playstation 2 controller
2 mm Phillips screwdriver

Instructions

- 1
  Remove the five anchoring screws from the back of the controller. These are located on the grips and sides, and in the middle of the case.
- 2
  Carefully pry the case apart and set the back aside. You are now able to see into the electronics of the controller.
- 3
  Unscrew the holding screws on the printed circuit board, or PCB. Take care not to touch the PCB with your screwdriver or any other metal implements.
- 4
  Lift the PCB from the front casing and place it in the rear casing. This will give you access to all of the buttons.
- 5
  Press the rear of the button panels on every button and trigger. Make sure that they are set fully into the holes and are not loose or stuck behind any plastic.
- 6
  Put the PCB back into place and put the screws back in. Tighten them down only until the screwdriver becomes hard to turn. Overtightening on a PCB will destroy the unit.
- 7
  Close the back onto the controller and snap it together before replacing the anchor screws on the case itself. You can now connect your PS2 controller and test it on your console.

Video Game Accessories