Nintendo Power Glove Instructions

Getting It Hooked Up

• The Power Glove is simple to plug into the Nintendo gaming system. First you will want to turn off your system. Take the junction box and plug this into the controller jack on the gaming system. Next take the glove cord and plug it directly into the junction box. Turn the console back on and your glove should power up.

Sensing Zone

• The glove has a sensing zone located directly in front of the TV. If you sit in the floor in an area that is lower than the junction box, the glove will not work well and may not work at all. Instead, try standing or sitting in a chair in front of the TV. You must stay within the sensor area for the glove to work properly. To center the control, simply point the glove at the TV and hit the center button. This will center the movement of the controller.

Controls

• The controls on the Power Glove are much the same as the controls on a regular Nintendo controller with the exception of the finger controls. There is a directional pad that goes up, down, right and left. The index finger controls the A button by simply bending your finger. The thumb controls the B button. This button is also controlled by bending the thumb. Practice to get used to the movement for optimal use.