Nerf Sports Pack Instructions

Attach the Remote to the Sports Plus Handle

• 1

  Remove the silicone sleeve from the Wii remote. Insert the remote into the Nerf Sports Plus Handle, making sure the remote's camera port is facing the handle's attachment head. The remote should fit snug in the handle.

• 2

  Slide the top of the assembled sport handle through the large opening in the silicon sleeve.Push the sport handle through until the attachment head reaches the camera port opening in the sleeve.

• 3

  Stretch the silicone sleeve opening around the attachment head and push the head completely through the opening.

• 4

  Pull the sleeve over the bottom half of the sports handle. Push the remote's safety lanyard through the bottom port, grab it, then pull it out.

• 5

  Push the lanyard through the indicated slot first, then pull the sleeve over the bottom of the remote if you are using the MotionPlus remote. Make sure the MotionPlus is properly connected to the remote then engage the locking switch.

Attach the Sports Accessories to the Sports Handle

• 6

  Hold the sports attachment with the arrow marker facing you and align the attachment's locking collar with the handle attachment head.

• 7

  Push the attachment head into the locking collar opening.

• 8

  Turn the accessory's locking collar in a clockwise direction until the collar compresses the silicon sleeve and locks into place. The Nerf logo should be facing you.

• 9

  Twist the locking collar gently to the right to ensure that it is properly attached to the sports handle. You should not be able to rotate the attachment at all. If the attachment feels loose, remove it and try again.