Home >> Internet Games >> Video Game Accessories

How to Assemble Rockband for Wii

"Rock Band" for the Wii is a rhythm-based music game that challenges players to match certain beats in a variety of well-known songs with actions performed on imitation instruments. It is necessary to assemble the guitar and drum kit before they can be used in the game. This is a simple process that requires no tools and can be completed within five minutes. A microphone is also available for the game, but this requires no assembly and can be used straight from the box.

Instructions

Guitar
- 1
  Align the sockets on the head stock to the plugs at the top of the guitar fret board and push the two pieces together.
- 2
  Turn the guitar over and remove the battery cover. Insert three AA batteries and then replace the cover.
- 3
  Take the guitar strap and push the holes at both ends of it over the two rivets at either end of the guitar body.
- 4
  Flick the switch on the back of the guitar body to the "On" position before use.
Drum Set
- 5
  Push the two support beams into the holes on one of the drum set foot sections. Align the holes on the other foot section up with the support beams and push them together to form the base.
- 6
  Slide the legs of the drum set into the holes in the base. Open the latch on the side of one leg and set the pole at the height you want the drum set to be at. Close the latch when you are satisfied. Repeat this process on the other leg and set it to the same height.
- 7
  Turn the drum pads over and remove the battery cover. Insert three AA batteries and close the cover.
- 8
  Align the holes on the bottom of the drum pads with the leg posts and place the drum pads on them. Lock this into position with the latch on the drum pads.
- 9
  Place the pedal on the support beams and plug the wire into the orange slot on the back of the drum pads.
- 10
  Move the switch on the bottom of the drum pads to the "On" position before use.

Video Game Accessories