Home >> Internet Games >> Video Game Accessories

Pelican Predator Instructions

Pelican Accessories, a manufacturer of modifications for video-game consoles, produced a wireless controller for the Playstation 2 called the Predator. The Predator's main feature was its wireless connection to the console, but it also offered a vibration feature and a satinlike controller coating. Its installation is simple and takes just a few minutes.

Things You'll Need

Playstation 2
Predator wireless controller
Predator wireless receiver

Instructions

- 1
  Turn off your Playstation 2.
- 2
  Remove the Predator controller's battery lid (located in back, between the grips). Make sure that the batteries, which are included in a new device, are inserted appropriately. The flat negative end of each battery should touch the metal spring in the battery compartment.
- 3
  Choose a channel for the controller. The channel switch is located on the front of the controller between the directional pad and the action buttons. You may choose any channel, as long as you match it on the receiver.
- 4
  Set the Predator wireless receiver to the same channel as the controller. The channel switch is a sliding switch labeled "CHANNEL" on the receiver.
- 5
  Plug the Predator wireless receiver into a controller port on the Playstation 2.
- 6
  Insert a game into the Playstation 2's disc drive. Turn the system on.
- 7
  Turn the controller on via the "On/Off" switch on the controller. The signal light will show green when a connection is made with the receiver. If the signal light is red, a connection has been made but the controller's batteries are low.

Video Game Accessories